Tag Archives: book construction

Unfinished Matters

I haven’t posted in a while, but I have been moving forward on several fronts.  In fact, I seem to have too many half-finished projects so thought I’d give you a glimpse of some of them.  Ever since Labor Day, I’ve been trying to set up a marbling session, but something always seems to interfere.  I think it’s called Life. To marble, I really have to have at least three days clear when I can concentrate just on that – four or five is even better – and it’s just not happening.

So on to what has been happening!  About a month ago,  I  wrote about some books I was starting using some of Sam’s metal.  Those books are not all finished, but progress has been made.

Metal books, memo pads and more.

This is the book and matching box I made for the brass pieces.  The brass had originally meant to be covers for a very small book, but I wanted to show them off more than that so I made this elegant book and box set.  I’m really pleased with how they turned out and can’t wait to put them in the Christmas Exhibit at our local gallery.

I’m not as happy with the Coptic book.  Love the covers, but I have never been a fan of Coptic binding. It is not very stable and doesn’t wear well.  I’m especially concerned that the metal will eventually cut through the binding cord.  If I do any more of these, I’ll have to find a way to put padding between the sewing cord and the metal, perhaps with a grommet.

While finishing the first two books, I started working on two other metal covers, but these are sewn over leather thongs.

I  haven’t finished these as I’m not sure about how I’m going to attach the spines. I don’t want an open spine, so I’ll have to attach the leather spine to the metal covers. Right now, I’m planning on a hollow spine with the thongs laced through the leather spine into the metal covers and using an adhesive to adhere the leather to the covers.  I still have to shape and pare the leather before I attach it.  Not sure how well it will work, but it’s fun trying!

Last was the book I am making from the leftover paper from the metal books.  It’s only 3″ high and isn’t finished yet.  I was going to call it “Mousings”, but  thought that might be a bit cutesy.

Next projects:

No idea what these will turn into, but I love these combinations!

Leave a Comment

Filed under bookbinding, Craft design

Design Decisions = Fun and Frustration

During the last week or so, I’ve been mulling over what to do with all the metal goodies

I have. If you don’t remember, this is the pile.

DSCN0001

I’m concerned about adhering anything, leather, cloth, tapes, etc., to the metal as it will need a strong bonding agent.  The ability of any material to withstand constant contact with metal may be another problem. For example, in a Coptic binding, how quickly will the metal cut through the binding thread? I’ve smoothed and rounded the edges and corners, but will it be enough? Will I have to cover the edges with a softer material?  So far lots of questions, no answers. This is what I have planned out, now to try to find out what will work.

These two have already been finished.  The book cover was made by creating a “sandwich” of two pieces of binders’ board with the copper plate in the middle.  The center of the top board was cut out, exposing the copper. This is one of the easiest and most secure methods of using metal, but it is essentially just decorative, not an integral part of the structure of the book. For the small notepad, I glued the metal directly to the leather spine using a metal adhesive. There were remnants of adhesive webbing on the reverse of this aluminium, so I just used PVA on the marbled paper.  This is a prototype and it will take some testing in use to see if the leather needs reinforcing or if other adhesives are needed.  I decided to do this one as simply as possible to test the strength of the bonding.

Now for what’s in planning stages:

These two lovely brass plates were originally intended to be front and back covers, but while playing, I changed my mind. I tried them with a dark brown leather, but much preferred the look against a black Italian bookcloth.  Sam Castner textured these for me and I really like the edges, so instead of making a sandwich as I did for the copper, I’m going to inset one into a book cover.  To inset, I’ll carve a piece out of the top board just slightly larger than the brass. The boards are then covered with bookcloth, which is pressed into the depression, and the brass is adhered as the final step.  The green decorative paper will be used for endpapers and the lacy tissue makes section dividers.  The other brass piece will be inset into a clamshell box that will be made to fit the finished book.

Although I don’t care for Coptic bindings in general, I thought I would try at least one and the holes were punched on these plates for Coptic sewing.  I’ve added a leather lacing just for decoration.  I’m going to sew this with a heavy waxed thread, but really expect the metal to cut through it.  It’s worth trying on a prototype anyway.  Sewing on cords that are laced into the cover will probably be a better technique.

I’m completely undecided about this last piece.  I love the copper plates and want to use them as the boards for a book, but I have no clue as to how I’ll construct the spine.  At the moment, I’m thinking about a leather covering over wrapped cords. Maybe using rawhide or leather thongs for the cords and lacing them into the copper.  The holes in the copper can be used structurally or just for decoration.  They could be covered with leather or bookcloth or left exposed. Not sure of anything, just know I love this copper and will have to find an appropriate venue for it.

Leave a Comment

Filed under bookbinding, Craft design

Updates

I’ve just updated my page on Building a Scrapbook and tomorrow, the books should be finished.

 

Textblock is placed inside cover

Textblock is placed inside cover

I’ve also written a bit more in the Problems of the Marbling Kind about paint

Getting the paints balanced perfectly with your size can be very tricky.  One of the most obvious problems is having the paint contract into a tiny ball and drop to the bottom of your tray.  This happens when the paint is too thick or heavy in relation to the size.  The solution is usually to add more water to the paint, a few drops at a time.  Alternatively, a surfactant can be added to the paint.  … for more see above link.

Silver granulation

Silver granulation

Leave a Comment

Filed under bookbinding, Marbled Paper

Scrapbook Construction

In the past few years, several people have asked if they could use my blank books as  scrapbooks.  My answer has always been an emphatic, “No!” Inserting extra thickness into any tightly bound book will sooner or later break the spine. With a Coptic or long-stitch binding there is a bit of leeway, but as soon as the boards or covers move beyond being parallel, the hinges are put under stress and will break.

The goal in building this type of book is to accommodate extra thickness between the pages while using a strong binding structure that will support extra weight.  I, personally, don’t like making scrapbooks: they tend to be large and I like small. The pages are difficult to sew and the endpapers can be a pain, I am documenting my progress on the page “Building a Scrapbook” if you are interested in the nitty gritty.  I’m still working on the books and will be updating the page as I progress.

On another matter entirely, I recently stopped by Sam Castner’s workshop and came away with some fabulous ideas and these:DSCN0001

Now I have to get to work designing and making!

Leave a Comment

Filed under bookbinding, Craft design

Finishing the Four Books That Were Started So Long Ago!

It usually doesn’t take me this long to finish my books. Really!  The story of these books started with the tiger blog. I’ve had many interruptions that have interfered with the flow, including one very exciting development that will be ready to be unveiled, uh,  soon.  I also gave myself a present of some super bookbinding equipment that you’ll see in the photos. I bought a finishing press and a plough from Jim at Affordable Binding Equipment.  For non-book people, a plough is a tool with a very sharp blade that is used to trim the edges of the textblock, giving an almost polished edges to the text.  They are very expensive and most non-professional binders don’t have them, instead using hand-torn, deckle or other rough edges. I rather like the rough edges as they give a hand-made feeling to the book. You can get perfect edges at your local office supply store!  That said, I enjoy having the ability now to do either with ease. Both the press and the plough are beautifully made and a joy to use.  I’m almost reluctant to use them for fear of scratches and dents.

First step was to try out the plough and cut some edges.

Ploughs usually have a straight, not circular, blade, but I found this design works well and is very comfortable to hold.  I was a bit concerned since my hands are small.  The person who recommended it to me was well over 6′ tall so I would guess that anyone would find this easy to use. Texts should be ploughed before the covers are measured to ensure an accurate fit.  I had already made the covers before I bought the plough, but I just couldn’t resist trying it out.

Next steps are to finished off the text block spine with ribbon marker (register), endbands, and mull or muslin. Then line out with paper and add a hollow tube.  With books as thin as mine usually are, some of these steps could be left out, but I usually add them all to ensure ultra-strong joints.

Now the textblock is finally finished and just needs to be married to the cover.

The textblock is carefully aligned with the cover and a piece of scrap paper is placed under the endpaper to protect the book. The endpaper is pasted out with PVA (No, it’s not Elmer’s although it looks like it!).  The waste paper is discarded, replaced with wax paper and the cover is gently closed. At this point everyone wants to open the cover to see what it looks like.  Do not do it! It’s a guaranteed way to wrinkle the endpaper. A piece of blotting paper is slipped under the cover, the book is flipped over and the other endpaper pasted down. The books is then put under weight and left to dry. It should not be opened until everything is totally dry. I usually leave my books overnight.

Finished books

If you still want to see more, please go to my page on Designing a Book and follow the links.

I will probably be putting these books up for sale on Etsy within the next few weeks.

Losing Her Marbles on Etsy

Leave a Comment

Filed under bookbinding

More on Cases

Explaining making cases seems to be taking even longer than actually making them!  We’re getting close to the end. Promise! This blog will be a quickie, just on covering the boards.  It’s one of my favorite parts as it is really the beginning of the end and I wind up with something that really looks like a book.  It also is the stage where my decisions on color, size and paper either come together or just miss.
So here are the graphics:

First the cover paper is cut to size leaving about 3/4″ turn-in on three sides. Fourth side will be flush with the spine. Before pasting out the paper, measure the paper against the spine and put a tiny pencil mark at head and tail.  These will be your guides as you place the paper down.  Using these marks as guides, place the dry paper under the board and trim the corners.  I use two pieces of scrap board as a cutting guide.  This gives a turn-in on the corner that is a bit larger than recommended, but it has saved a lot of covers for me!

With everything marked and trimmed, paste out the paper starting from the center.  Always put your adhesive on the paper and not the board. Paper stretches when it comes in contact with any moisture and you want it to stretch before it is on the board.  This way, as the paper dries, it will shrink giving a nice smooth fit.  Paper that has been pasted out will tend to curl or become all loose and floppy so the register marks become very important.  As you place the paper down, the marks will NOT be quite accurate because of the stretching. If you are worried about getting a perfect edge between the paper and spine, you can let the paper ride up over the spine by a tiny amount, not more than 1/32 inch.

When I paste out, I leave a very small dry area at the fore edge turn-in and on the spine edge of the head and tail turn-ins. This allows me to handle the paper from these very small dry areas and not get PVA all over my fingers. It also seems to give me more control over the paper. The bad part of this is that some papers will pucker around any dry area.  As with any technique, try several and use the one that works for you.  I work with many different weight papers for my covers and have found that I have to adapt my techniques to the paper.

Lay the paper down, starting at the spine edge and gently smooth it down toward the edges. Don’t rub it down hard until you are sure that it is smooth and positioned correctly. Make a fist and use the pinkie side to smooth down the paper. This is the flattest surface you can make with your hands. Bone folders are not recommended in smoothing damp paper. It’s just too easy to press too hard and tear the paper.  I do use them or the back of a fingernail on the edges on the board to get a nice crisp edge. After the front is pasted, flip the board over and turn in the head and tail and finally the fore edge margins.  You may have to add paste if it has dried or if you have used my “dry spot” method. Cover the back board in the same way and you are done!  Ideally you should have a 3/4″ turn-in all around the case.

Notes on special cases:  If your cover paper has a figurative design, you’ll want to take care on the cover placement.  See the airplane design in the photos. In cutting the paper, I had to waste a bit of paper to place the red plane where I wanted it. With any designs that have a definite up and down, make sure you cut pieces that are mirror images of each other, not the same and that both are facing in the same direction when on the book.  All over designs are much easier.
Half-cloth binding: On the binding that has bookcloth on the corners, I marked the board with diagonal lines 1″ in from the top and bottom fore edges. After registering the head and tail, I folded the paper along those lines. The paper was then trimmed along the same lines and pasted down, leaving the board exposed in the corners.  The small triangles of book cloth were pasted onto the board corners, trimmed, folded under and pasted down.

In general when pasting, always put the paste on the material that will stretch the most. Everything, even board and wood will stretch when wet. With some materials it is hardly noticeable.  PVA dries faster than paste which has the advantage that it “grabs” quickly and the disadvantage that re-doing something becomes harder.  Paste is much more forgiving and a cover can be repositioned several times, but it grabs more slowly and you may have to hold something in position for a while.

Next I will put the finishing touches on the textblock and marry the case to the text.

Leave a Comment

Filed under bookbinding

Making the Cases or Covers for the Books, next step

Before the Industrial Revolution, most books were made by sewing the pages or textblock directly onto the covers, which were usually made of wood and then covered with leather or fabric.  Binding books in this manner was always done by hand, one book at a time. With advances in printing, faster ways of covering the pages had to be invented.  The answer was the case-bound book.  A cased book is made in two parts, the textblock and the case. These two are then joined together in different ways.  Almost all modern books, including those with leather covers, are case-bound. To the purist, they shouldn’t be referred to as “bound” at all.  I have made a few bound books, but almost all of mine are actually cased.

So on to how to do it.  I use Davey Board for my covers and it comes in large sheets, 30″ x 40″ so the first step is to cut it into usable sizes. The arrows on the board indicate the direction of the grain.  I mark the sheet before cutting when it is easy to determine the grain. As the pieces are cut smaller and smaller, it is harder. The grain of the board must always be parallel to the spine of the book. If the grain is crosswise, it can warp and pull against the joints, breaking them. I have three cutters in my studio. The grey fancy one (Ideal) is wonderful for cutting lots of paper to exactly the same size. I do use it with light-weight board, but I probably shouldn’t.  The tan cutter (Boston) doesn’t have a guard so I can use it to cut the big sheets.  It’s just large enough that I can cut halfway down the sheet, flip it and cut the other half.

The first cuts I make are just rough cuts. If I need 71/2″ finished board, I’ll cut an 8″ strip.  My last cutter is an ancient Milton Bradley school cutter, probably from the 1940s.  It still makes a beautifully sharp cut that is perfectly square.  It is also the only cutter I have that can cut very small pieces (1″ x 2″) accurately. Both of the other cutters have guards and edges that get in the way of making accurate small cuts. Before starting to cut, I measured the textblocks and since I am doing four books at the same time, write down the height and width of each.  The boards should be cut the same width as the text and 1/4″ taller. After I have rough cut the boards, I make an exactly square cut on one corner and mark it.  All other cuts will be measured from this corner.  The marked corner is always placed against the guard of the cutter, even if this means flipping the board over. This solves the old problem of cutting one side after the other and finding you never have parallel sides.  After cutting the boards, I check them against the text just to be sure.  Yes, I have made complete covers with spine and paper added only to find the measurement was off and the text doesn’t fit. Of course, I could avoid this by making the books all the same size, but that would be boring.

Spine stiffeners are cut from 2-ply museum board.  They are the height of the case by the width of the textblock.  Next step is to cut the bookcloth spine and attach it to the covers. Most of my books are quarter bound, but here I decided to add corners to one book making it half-bound. First I measure and mark off the depth on the spine overlap onto the boards.  It depends on the size of the book, the pattern of the cover and my mood.  Mine range from 1/2″ to 7/8″. I also marked the corners for the half-bound book. The spines are cut 1 1/2″ taller than the boards and the width of the edges plus the width of the textblock plus 1/2″. The spine is glued to each edge and the spine stiffener laid down in the center.  There should be 1/4″ on each side of the stiffener, but for some reason these were a little tight.  I must have been off on one of my measurements.  Sometimes 1/16″ will do it. After the stiffener is glued down, the head and tail cloth is glued.

Next, it’s on to cutting and gluing the covers.

Leave a Comment

Filed under bookbinding

Sewing the Books

There are many ways of sewing text blocks for bound and cased books.  In fact there may be hundreds.  Linda Blaser wrote an article once documenting the styles she had encountered in her career as a book conservator.  I once had a copy, but can’t find it and haven’t been able to track it down. The method I usually use twists the thread over the tapes rather than leaving it flat. The benefit of this is that the gatherings are pulled tighter together.  This is important for me since I don’t have a proper book press for gluing out the spine, so the extra compression is important.  The problem is that it creates more bulk on the spine which can be unsightly, especially if you are binding with leather. If I am doing a large book that needs three or more tapes, I sometimes alternate the twist with a flat thread.  I had planned to do it on the larger books as a demonstration, but once I started sewing, I forgot!

On my four current books, the first thing I had to do was to tip in the frontispieces on the two larger books.  I first trimmed the illustrations to the size of my pages plus about 1/4″ for a tab. The frontis was placed in position and the tab was very gently – I’m dealing with paper that’s about 150 years old – folded around the first gathering. Using PVA as the adhesive, it was then glued to the back of the section.  The only glue was on the tab, not on the engraving itself.  By the way, I tend to use the terms glue, paste and adhere interchangeably although technically they are different.  I only use a reversible PVA in my books.  Well, occasionally I use paste, especially with leather, but that’s a whole ‘nother thing.

Adding the frontispieces.


I’ve tried to photograph the entire process of sewing the textblock with descriptive titles from punching holes to finished sewing. I don’t use a cradle for punching as I find them cumbersome and my books are usually only five section books.  These four happen to be a bit larger, but still only have seven sections.  For the same reason, I don’t use a sewing frame, plus my books tend to be different heights.


All four text blocks.
TextblocksNext I tipped in the endpapers and trimmed them to size.  An extra 1/4″ is left along the inside fore edge of both endpapers.  This is folded under and glued to the first and last pages of the textblock.

Now it’s on to preparing the spine and covers.

You can see more of how I make my books on previous pages.  Design, Frontispieces, Sewing.

3 Comments

Filed under bookbinding

Books, Step by Step

Sometimes I make books in almost a production mode, working on them every day till they are done.  Other times, I do it in fits and starts, leaving them half started for a while and coming back to them after many interruptions.  The last four books that I wrote about appear to fall into the latter class!  I did the design work, choosing papers and then put them aside.
This week, I went back to them for the next step – choosing paper for the text block and deciding on the size and shape of the book.  I didn’t do anything special with the papers this time.  I’m using my standard Strathmore and Canson drawing papers. I like the weight and feel of them.  I would love it if I could get them in colors, but the colored sheets tend to be heavier as well as much more expensive. I do use Pastel paper occasionally, but it has a definite “tooth” and is not right for some of my books.  I also like the Strathmore “Toned Tan” and “Toned Grey” for my earthier creations and have used a lot of that in the long-stitch books.
Back to the current four.  After cutting the text paper, I print a title page, verso and colophon.  Most blank books don’t have titles, but I like adding them.  I think it makes them more like real books. My titles range from the pedestrian My Journal, to the whymiscal Wish on a Fish. They tend to reflect the color, Purple Prose, or content, Purring Thoughts, of the book’s cover.  These titles were more of the pedestrian variety. Here the pages have been cut and folded and the titles printed.

The two larger books are almost the same size. The smaller one was cut to fit the tiger endpapers and the medium sized one was determined by the cover design. The pages are folded and gathered into sections or gatherings, ready to be punched and sewn.  I like to add an extra ornamental page of light weight paper around the even sections, just to add a little something special. Here are the papers I chose for the larger books.

I also added frontispieces to the two larger books.  These are illustrations that were taken from two different books from 1840-1850.  The books were badly damaged and had fallen apart, but I was able to rescue some of the engravings.  The illustrations are not copies, they are the real thing.  As you can see in the photo, they need to be trimmed down and tipped in.  I’ll do this by leaving a narrow edge that will fold around the back of the title page.  The flap will be glued in, but it will also be sewn into the first gathering, making it an integral part of the book.  Sometimes, when the paper is too brittle to fold or is smaller than the book, I just tip it in opposite the title.

My next steps will be to attach the frontispieces and sew all of the textblocks.  In the meantime, I have learned to put all parts of each book into a separate plastic bag!  Before I did this consistently, I would switch papers mid-stream and discover I had to cut paper all over again to match the new configurations!Bagged2

The reason I didn’t move on to sewing the textblocks was that I was sidetracked by note cards, which will be my next blog.  I hope to get to it soon.

I have written at length about all the processes in making a book on other pages on this site, starting here.

 

 

Leave a Comment

Filed under bookbinding, Craft design

Corners, Double Boards, and Gothic Bindings

Finally, back to my books from the Folk School.  My first two books are shown here.  I have always said that I don’t work in leather. It’s too fussy, too expensive and too time consuming.  This week I ended up four leather bound books!  The most complicated is a variation on a traditional Gothic structure.  I cheated and used a textblock sewn over tapes rather than lacing in the boards, so it is more like a cased rather than a bound book.

Many important Gothic and Victorian psuedo-Gothic books were made with double boards, allowing many different types of ornamentation. While thinking about what I could do with double boards, the idea of windows kept running through my mind.  I had a piece of very thin copper that I had tried to torch fire. It didn’t come out very well.  It was bumpy and uneven and generally a bit of a mess.  I had no idea if it would just crack when placed between the boards.  I was able to trim the copper to a suitable size, so the first problem was overcome.  Here are some photos of the process.

Fortunately, the enamel hasn’t cracked and the bumpiness gives an interesting texture to the piece.

The other book I made with an enameled piece was an easy one.  I used the same technique I had used before with coins.  I cut a recess in the top board, tucking the bookcloth into the recess and glued the piece in place. I used this same technique with a black cloth book after I returned.

The last technique we used was working with metal – brass, copper, bronze and pewter – as corners, bosses and latches. This was the first time I had ever worked with metal and was a bit of a challenge.  Metal has to be exact.  You can’t nudge it, pinch it or approximate. I’d love to have more time to work with metal and hope I can in the coming year.  For this time I just made some brass corners. Not much for a metal worker, but exciting for me.  There’s a lip that fits around the edges of the boards and then the corner is fastened to the boards with a rivet. I also gave a brass a bit of texture. As a final touch, this book has a line of blind tooling parallel to the spine.

So that finishes all five books I made during my week.  Since I’ve been home, I’ve been finishing up odds and ends, trying to put together stock for the shopping season.

You can always find my books and paper on Etsy via my page or by going to www.Etsy.com/shop/LosingHerMarbles

Leave a Comment

Filed under bookbinding, Craft design